Step-by-Step Instructions
1. Cut the pine board into pieces: two legs at 12 inches each, one step at 10 inches, and two braces at 8 inches.
2. Sand all edges and surfaces smoothly using 120 grit sandpaper, then finish with 220 grit.
3. Attach the two legs vertically to each end of the step piece using wood glue and screws. Pre-drill holes to avoid splitting.
4. Attach the two braces between the legs on each side, about 2 inches from the bottom, to add stability.
5. Fill any screw holes with wood filler and sand smooth once dry.
6. Apply wood finish or paint as desired and let dry completely before use.