Step-by-Step Instructions
1. Measure your DVD collection width, height, and depth to determine the size of the holder.
2. Cut the plywood or MDF into pieces: back panel, two side panels, bottom panel, top panel, and a door panel matching the front size.
3. Sand all edges and surfaces smooth.
4. Assemble the box by attaching the sides, bottom, and top to the back panel using wood glue and screws.
5. Attach the hinges to one side of the door panel and then fix it to the front of the box.
6. Install the hasp lock on the door and box frame so the door can be locked and unlocked with the key.
7. Paint or stain the assembled box and door as desired, then allow to dry.
8. Attach the red LED strip inside the top interior of the box, securing it with adhesive backing or small nails.
9. Connect the LED strip to the battery pack or power adapter and install the toggle or push button switch on the side or back panel.
10. Hide wiring neatly inside the box, securing with tape or clips.
11. Place DVDs inside the holder, lock the door, and test the LED lighting by turning on the switch.
12. Make any adjustments needed for smooth door operation or wiring safety.